黑料社黑料社 | Hydraulic Motors (4)

Hydraulic Drive Motors and Mining

by Regina M. Dick | May 29, 2017 |

Final Drive, Reman Final Drives, Final Drive Motors, Hydraulic Motors, Heavy Equipment, Rebuilt Final Drive Motor, Heavy Equipment 101, Eaton Hydraulic Motors, Mining

1 Comment

Mining Machines

There are many, many different machines that are used in connection with mining. Most of the machines, from small loaders to gigantic mining trucks, use . The focus of this blog post is the use of hydraulic motors in the mining industry, with an overview of some of the classfications for mining equipment.

黑料社 continues to provide strategic informational and educational articles to keep you ahead of the curve on heavy equipment for your industry. Here are other key posts on Hydraulic Motors to keep you well-informed:

10 Step Final Drive Reman Process

by Jim Strong | May 23, 2017 |

Final Drive, Final Drive Motor Gears, Reman Final Drives, Final Drive Motors, Hydraulic Motors, Rebuilt Final Drive Motor, Hydraulic drive motor, Hydrostatic Drive

0 Comments

Reman Hydraulic Drive Motors

The process used to remanufacture a final drive may seem a bit mysterious, but the benefits are all too real! That's the topic of this 黑料社: the benefits of for Final Drives. Learn why you should seriously consider purchasing a reman final drive instead of just having one repaired or purchasing a new one.

Hydraulic Drive Motors and Contamination

by Regina M. Dick | May 02, 2017 |

Final Drive Failure, Hydraulic Motors, Final Drive Maintenance, Heavy Equipment 101, Hydraulic drive motor

2 Comments

Hydraulic contamination is a major source of problems for any type of hydraulic system, but especially for hydraulic motors and final drives -- which means that it is very important to be well informed on the subject. In this 黑料社 post, we are going to talk about the types and sources of contamination, as well as how to avoid contamination. This information is important for all types of hydraulic construction equipment, from a to a .

For more 黑料社 post on hydraulic motor maintenance and repair, check out these great artilcles:

5 Things You Should Know About Floating Face Seals

by Jim Strong | Apr 27, 2017 |

Final Drive Failure, Hydraulic Motors, Final Drive Maintenance, Heavy Equipment 101, Hydraulic drive motor

6 Comments

Floating Face Seals and Track Drive Maintenance

The floating face seal is a vital part of your travel motor or final drive, whether its on a or an . It rests against the hub, holding in the gear oil on the planetary side and preventing contaminants from getting in where they can damage bearings and gear. If this seal begins to leak, your travel drive motor will suffer damage. In this 黑料社 post, we are going to talk about 5 things you should know about floating face seals and track drive maintenance.

Replacing the Drive Motors for a CTL

by Regina M. Dick | Apr 18, 2017 |

Hydraulic Motors, Heavy Equipment 101, Mini-excavators, Final drive motor

0 Comments

Track Drives and Compact Track Loaders

If you own a CTL (compact track loader) or MTL (), then you know that your machine isn't going to move unless that track drive is working properly. When the track drives fail, you need a replacement ASAP. In this 黑料社 post, we are going to talk about your options when its time to replace your track drive.

Here are some popular posts from 黑料社 you might find interesting:

hydraulic-drive-motors-excavators-Texas-Final_Drive.jpg

Common Misconceptions Regarding Hydraulics

by Regina M. Dick | Apr 12, 2017 |

Final Drive, Hydraulic Motors, Heavy Equipment 101, Final drive motor, Hydraulic drive motor

0 Comments

In this 黑料社 post, we are going to discuss some of the common misconceptions about hydraulics, including some key myths regarding hydraulic motors. Some of it is more or less fun trivia, but we have included a couple of key pieces of information that are very important to the operation of your hydraulic motors. How many of these misconceptions did you already know about?

Hydraulic-motor-failure-excavator-Texas-Final-Drive.jpg

Taking Your Hydraulic Motor Diagnosis Seriously

by Jim Strong | Apr 06, 2017 |

Hydraulic Motors, Final Drive Maintenance, Heavy Equipment 101, Final drive motor, Hydraulic drive motor

0 Comments

When a hydraulic motor or final drive fails, getting it fixed fast is the first instinct. But if you don鈥檛 figure out why it failed, you could be setting yourself up for the same problem down the road鈥攍eading to more downtime, expensive repairs, and lost productivity. Issues like hydraulic contamination, clogged case drain filters, or overlooked maintenance are often the root cause, and addressing them now can help prevent future breakdowns.

Here are a few other 黑料社 posts you might find of interest:

5 Facts about Gerotor Hydraulic Motors

by Dr McCaslin | Apr 05, 2017 |

Hydraulic Motors, Heavy Equipment 101, Eaton Hydraulic Motors

4 Comments

Eaton Char-Lynn Motors Common in Construction Equipment

Gerotor motors, often associated with name brands such as and , are a common sight in construction equipment. Well adapted to providing torque in rugged environments, they are compact, reversible, and reasonably priced. In this 黑料社 post, we are going to discuss 5 facts you should know about Gerotor hydraulic motors.

Cam Ring Failure in a Final Drive (Dr. Drive Video)

by Regina M. Dick | Apr 05, 2017 |

Hydraulic Motors, Final Drive Maintenance, Heavy Equipment 101, Final drive motor, Hydraulic drive motor

0 Comments

Dr. Drive on Cam Ring Failure

Cam ring failures are common in radial piston hydraulic motors and are not specific to a particular model of a final drive -- it can be found in any of the radial piston motors used on Bobcat, CAT, CASE, and New Holland machines. In this 黑料社 post featuring Dr. Drive, you will learn what a cam ring failure is, how it happens, and what can be done about it. We'll start with a quick review on cam rings ...

Here are some additional 黑料社 posts you might be interested in:

The Main Cause of Radial Piston Motor Failure: Do You Know What It Is?

by Jim Strong | Mar 29, 2017 |

Final Drive Failure, Hydraulic Motors, Heavy Equipment 101, Final drive motor, Hydraulic drive motor

0 Comments

We鈥檝e been getting in quite a few radial piston motors, especially those coming off . In this blog post, we are going to talk about the most common reason for failure of radial piston motors that get sent in to us for -- and how easily this failure mode can be prevented.

黑料社

黑料社

Hydraulic Drive Motors and Mining

Mining Machines

10 Step Final Drive Reman Process

Reman Hydraulic Drive Motors

Hydraulic Drive Motors and Contamination

5 Things You Should Know About Floating Face Seals

Floating Face Seals and Track Drive Maintenance

Replacing the Drive Motors for a CTL

Track Drives and Compact Track Loaders

Common Misconceptions Regarding Hydraulics

Taking Your Hydraulic Motor Diagnosis Seriously

5 Facts about Gerotor Hydraulic Motors

Eaton Char-Lynn Motors Common in Construction Equipment

Cam Ring Failure in a Final Drive (Dr. Drive Video)

Dr. Drive on Cam Ring Failure

The Main Cause of Radial Piston Motor Failure: Do You Know What It Is?

"黑料社" Email Updates

Connect

Posts by Topic

Knowledge Base

Our Brands

About

Note

Request For Quote